Cisco VPN Workaround

-
Free solution to get your VPN working on Vista 64. Got to http://sourceforge.net and download VPNC Front End. Makes connecting to your company VPN easy. It even has a PCF import tool to setup the connection. The import tool can be found after opening VPNC Front End you right click on it on the taskbar section (by the clock) and you should see an import option, if you aren't able to right click close out of the program if it on your desktop. You just need to make sure you selet the TAP Device as the Network interface and you're good to go. Took me 2 hours of fishing for this answer and 5-10 mins to set it up. Very happy so far. As always any questions on how to do any of this just ask.

Comments

Post a Comment

Popular posts from this blog

XBox 360 Bumper doesn't work.

-
First review how to open/clean your XBox 360 Controller, here Symptoms: My right bumper is sticking when i push it. My left bumper only works some times. The bumper seems loose or doesn't make the click noise when I push it down. Fixes For Problematic XBox 360 Bumpers. After you take apart the controller using the above guide you will see on the circuit board two white buttons facing forward (next to the left joystick and the other next to the "Y" button). These are the actual buttons that are being depressed when you go to press RB or LB (right bumper, left bumper). First we want to make sure these are cleaned thoroughly and no debris is caught in or around the button. If it is sticky I would use a Q-tip and rubbing alcohol to remove the gunk. After making sure the button is clean, press it down. Do you hear a click ? If you don't that means the button itself is messed up and short of taking it to a repair shop it's done. If it does click, we can cont
Read more

OldFallout 3

-
Taken from http://www.bethsoft.com/bgsforums/index.php?showtopic=904034&st=0&start=0 and restored to its former glory! READ THIS POST BEFORE ASKING QUESTIONS! POSSIBLE SPOILERS INSIDE MAIN PROJECT We have the official word from Bethesda that they use "some" (SM2.0b implied) shaders that 9x00, and similiar SM2.0 cards, can't run. Primary goal Getting the game up and running without crashing. Current progress here has been through disabling things. Secondary goal Making it look and run as good as possible. Probably includes work on the shaders and re-enabling things. Please keep your criticisms to a minimum. If you do not wish to get involved, then don't, but please don't be a dick about it. This is supposed to be a fun challenge. Thanks everyone for shown interest and help. Keep it up. INSTRUCTIONS 1. Settings in the .ini files (mydocuments/mygames/fallout3 - if not there, run launcher once) fallout.ini falloutprefs.ini Search both files (ctrl-f in notep
Read more

How to Fix Your XBox 360's Joysticks

-
First review how to open/clean your XBox 360 Controller, here Symptoms: My stick is flacid, lol. There is no resistance or there is too much. Sometimes I will hit 'bumps' when moving my joystick. My joysticks alternate button doesn't push down or click properly. My joystick moves very slowly or is unresponsive. Fix for All XBox 360 Joystick Issues. After you have taken the controller apart the first thing you want to do as always is clean the joysticks base thoroughly. Including the "press down" button on the joystick, which is located on the right side of the joystick's base , also the inside should be cleaned with a Q-Tip and if available, canned air to blow out any debris. Once it is cleaned thoroughly, check to see if the problem is still there. Double check for any debris by rotating the stick 360 degrees slowly. For any obstructions that may need to be removed. If the problem is to due with the joysticks movement and cleaning it thoroughly did
Read more